Inground adjustable colour-changing projector with high power LED suitable also for outdoors. Light source consisting of 15 Luxeon K2 LED, with a maximum power consumption of 25W and 10° and 40° alternative optics. Built-in 230-240V, 50-60 Hz power supply. It can be controlled by any DMX 512 external controller or it can work in standalone mode, playing back pre-set automatic colour sequences (16 shows available). High transmission, extra clear glass with 40 Joules impact resistance. Housing made of 18µ pure anodized aluminium with 10 years anticorrosion guarantee. Natural and black anodized aluminium  insertion collar. Forced air circulation inside the fixture to ensure a perfect thermal dissipation. Supplied with installation casing, 2 PG16 cord grips for looping, DMX power cable and instructions manual. On request, for public pedestrian areas, this fixture can be supplied with a special anti-slip glass.

LIGHTING FEATURES:
- Light source: 15 high intensity Luxeon K2 LED, powered at 350 mA.
- LED nominal luminous flux (value supplied by the manufacturer): 480 lumen.
- Light beam: symmetrical, available in 10°  or  40° version.
- Beam orientation: the LED hot plate’s angle can be adjusted and locked at the desired position.
- Additive RGB colour-mixing with more than 16 million colours.
- Life: more than  50,000 hours, without reduction of light’s quality.
- UV and IR free.

ELECTRICAL SPECIFICATIONS:
- Built-in power supply: 230-240V, 50-60 Hz.
- Maximum power consumption: 25W.
- DMX 512 interface: incorporated.
- DMX output: amplified.
- DMX termination resistor: activated by dip-switch.
- Internal dip-switch:  to select the function mode and the DMX address.
- Ambient operating temperature: -20°to +50°.

RGB OPERATION:
- Without controller. Automatic replay of one colour scenario among a selection 16 presets (8 static colours + 8 colour-changing), using the “Easy-Run-Menu” function. 5 playback speed options. Master/slave configuration with other fixtures.
- With external controller. The fixture can be controlled by any external device featuring the DMX 512 protocol. Digital addressing by using the dip-switches. Three control channels are required.