Powerful, programmable white light washlight with digital adjustment of colour temperature, suitable also for outdoors. It contains high-power white and amber LED with 150W maximum power consumption, available with several optics options.  Built-in universal power supply 90-250V, 50-60 Hz. Two operating modes: (1) controlled via external DMX 512; (2) directly programmed through the built-in digital display. Extruded, die-cast aluminium and PVC housing; anti-shock front glass. Multi-function digital display, protected by an anti-vandalism front cover. Silent operation thanks to convention cooling system. Electronic overheating protection system. Prewired with 2 DMX cables of 2 m each and 2 m power cable; supplied with multi-installation steel plate and instructions manual.

LIGHTING FEATURES:
- Light source: 49 high-power Luxeon LED (31 white, 18 amber).
- Luminous flux: 3800 lumen.
- Light beam: available with 8°, 25°, 40° lenseses, vertical or horizontal elliptical.
- Additive colour mixing white and amber LED with colour temperature adjustment between 2000 K and 8000 K(*).
- Separate overall dimmer function from 0 to  100%.
- Shutter effect or flashing with variable frequency
- Life: more than 50,000 hours, without reduction of light’s quality.
- UV and IR free.
- Life: more than 50,000 hours, without reduction of light’s quality.
- UV and IR: free.

ELECTRICAL SPECIFICATIONS:
- Built- in universal power supply: 90-250V, 50-60Hz
- Maximum power consumption: 150W.
- Electronic system for automatic light output reduction in case of overheating.
- Built-in DMX 512 interface
- Built-in multi-function digital display protected by an anti-vandalism cover.
- Programmable functions: initial and service settings (clock, date, operating hours, internal temperature), DMX address, master/slave setting, dynamic CT scene programming, weekly scheduling, white balancing.
- Firmware updae through the DMX input
- Prewired DMX input and output.
- Ambient operating temperature: -20° to +50°.

WHITE LIGHT TUNING:
With external controller.
- The fixture can be controlled by any external controller featuring the DMX 512 protocol. Any colour temperature value or change can be programmed within the range allowed by the LED selection. Digital addressing by using the dip-switches. 8 control channels are required .
Without any external controller (stand-alone):
- Programming through the digital display and the incorporated memories;
- 5 different programs can be stored, each made of up to 10 scenes.
- In each scene colour temperature, intensity, length of time and fading can be separately adjusted. 
- Programmed sequences can be played back in a loop or weekly scheduling can be set with up to 48 different events per day.
- one Kaleidos can be configured as a master to control up to 29 units configured as slaves.