Linear white light asymmetric projector with LED and digital colour temperature adjustment, suitable also for outdoors. Featuring 10° x 100° elliptical light beam, it contains white and amber Luxeon K2 LED, with 48 W maximum power consumption per linear meter. Built-in universal power supply 100-240V, 50-60 Hz. It can be controlled by a DMX 512 signal or 10 predefined colour temperature values can be selected. Extruded aluminium housing profile; transparent shockproof polycarbonate front cover. Mulitiple accessories available for a versatile mounting. Supplied with 1,5 m lmultifunction cable (power + DMX) and instructions manual.

LIGHTING FEATURES:
- Light source: 15 high intensity Luxeon K2 LED, powered at 350 mA and 700 mA.
- Light source: high effeciency Luxeon K2 LED, powered at 350 mA.
- Nominal luminous flux: 1070 lumen for linear meter.
- Light beam: elliptical 10°x100° with blade effect.
- Additive colour mixing with white and amber LED with adjustable colour temperature between 2300 K and 5700 K*
- LED proportion: 1 amber LED every 2 white LED.
- Life: more than 50,000 hours, without reduction of light’s quality
- UV and IR free.

ELECTRICAL SPECIFICATIONS:
- Built-in universal power supply: 100-240V, 50-60 Hz.
- Maximum power consumption: 48W per linear meter.
- Ambient operating temperature: -20°to +50°.
- Built-in DMX 512 interface
- Amplified DMX output
- Internal dip-switches for operation mode setting and DMX addressing
- DMX line termination resistor insertable through dip-switches.

WHITE LIGHT TUNING:
• Without controller.
Selection of 10 pre-defined colour temperature values, using the built-in “Atmosphere Tunes” function. Master/slave configuration with other fixtures.
•With external controller.
The fixture can be controlled by any external device featuring the DMX 512 protocol. Any colour temperature value or change can be programmed within the range allowed by the LED selection. Digital addressing by using the dip-switches. Two or three control channels are required.