Ground recessed line of light with RGB colour-mixing for both indoor and outdoor use. 90° x 120° asymmetrical light beam, evenly diffused through the opaline glass cover. It features low power full-colour LED and can be controlled by the Secs 75 external driver, featuring a compatibility with DMX 512 external controllers and offering automatic playback of preset colour sequences. Stainless steel housing with flush safety, white silk-printed and thermally tempered glass, featuring a pressure locking system against the gasket, assuring perfect watertight protection. Absence of ant metallic frame allows for easy installation in sequence, without visible interruptions, Supplied with 2 x 1,5 m four-wire cables for the connection to the external driver and looping.

LIGHTING FEATURES:
- Light source: 2 linear array of 0,3W full-colour LED.
- LED array nominal luminous flux (value supplied by the manufacturer): total 360 lumen (40 LED version); 540 lumen (60 LED version).
- Light beam: 90° x 120° asymmetrical, evenly diffused.
- Additive RGB colour-mixing with more than 16 million colours.
- Life: more than 50,000 hours, without reduction of light’s quality.
- UV and IR free.

ELECTRICAL SPECIFICATIONS:
- Power supply: 24VDC constant voltage through Secs 75 or equivalent driver.
- Power consumption: 12W (40 LED version); 18W (60 LED version).
- Each Secs 75 unit can drive simultaneously up to 3,6 linear meter of product.
- Multiple units to be connected in parallel.
- Supplied with 2 x 1,5 m four-wire cables for the connection to the external driver and looping without connectors.
- Maximum length of the connection cable from the last fixture to the driver: 20 m.
- Ambient operating temperature: -30° to +50°.

RGB OPERATION:
• When the LUCEVIVA Secs 75 driver is used:
a. Automatic playback without external controller, by using he “Easy-Run-Menu” function (selection of 16 colour presets, 5 playback speeds, master/slave configuration).
b. External control by any DMX 512 compatible controller (see Secs 75 specifications).
• Using any driver designed for RGB LED with PWM technology.