Ground or ceiling recessed colour-changing asymmetrical luminaires T16 RGB linear fluorescent lamps. Source: 3x28W T16 lamps, with aluminium symmetrical linear optical reflector. Built-in electronic analogical power supply , 90-270V, 50-60 Hz. Dynamic colour-changing operation controlled by external modules featuring:
(1) wireless Light Navigator technology; 
(2) DMX 512  cable digital protocol;
(3) DMX Wireless optional devices. Folded and electronic welded plate housing; opal polycarbonate diffusion screen.
Pre-wired,  supplied with terminal block for the connection to the remote control module. Complete with 3 lamps (red, green, blue) and instructions manual.

LIGHTING FEATURES:
- Light source: 3 x T16 linear fluorescent lamps (1 red, 1 green, 1 blue) of 28 W each.
- Lamps are included
- Nominal luminous flux (from manufacturer’s datasheet): 6300 lumen.
- Asymmetrical light beam 
- Additive RGB colour-mixing with more than 16 million colours.
- Electronic intensity adjustment from 0 to 100%
- Nominal lamp life: 16.000 hours.

ELECTRICAL SPECIFICATIONS:
- Built-in universal power supply: 90-270V, 50-60Hz
- RGB operation electronics:  expernal module to be ordered separately
- Maximum power consumption: 90W
- Ambient operating temperature: +10° to +50°.

RGB OPERATION:
Light Navigator version:
- A external control module to be connected to the Fluolite lighting box has to be ordered separately, featuring the patented radio control system, developed by Targetti in collaboration with the University of Florence. Controlled by a standard Light Navigator radio remote controller, is available in Master and Slave versions.
- Five standard colour-changing sequences stored in all fixtures (3 unchangeable; 3 can be re-programmed) that can be selected, started and stopped by the radio remote control.
- The radio remote control allows direct adjustment of static colour, intensity and colour temperature.
- With full RGB (white light), 32 preset values of colour temperature can be selected.
- Fixtures can either be MASTER or SLAVE (to be specified on the order); a Master can control multiple Slave units; one radio remote control only is needed.
- Master/slave groups, independent from each other, can be created in the same installation.
- Full compatibility among different Light Navigator fixture versions (floor lamp, suspension, wall washer, etc); “mixed” groups can be created. 
- Maximum distance between controller and fixtures: 50 m in open air; 20 m with obstacles.
- Special software (free download from www. targetti.com) can be used for changing fixture’s  settings (master/slave, address, group) and to reprogram sequences.
 
Version driver by Secs Fluo DMX (Simboli: DMX, EasyRun):
• A  dedicated external control interface (Secs Fluo DMX) has to be ordered separately for  connection to the Fluolite lighting box (detailed information at page 180)
• Secs Fluo DMX can operate either as a stand-alone unit (no DMX controller) or can be controlled by an external DMX signal. 
• Without external controller. Using the “Eay Run Menu” function, automatic playback of one colour scenario among a selection 16 presets (8 static colours + 8 colour-changing); 5 playback speed options. Master/slave configuration with other fixtures.
• With external controller. The fixture can be controlled by any external device featuring the DMX 512 protocol. Digital addressing using internal dip-switches. Three control channels are required.
• Optional wireless DMX devices can be used if needed.