Bollards
Zedge Pro
Code
1E3762EL90
Light colour
3500K
90
90
Light distribution
Floor Washer
Output
15.6W
416-635lm
416-635lm
Power supply
Control
220-240Vac
ON-OFF
ON-OFF
Colour
DEEP
WIDE
1 / 4
Technical Data
Source
2 high efficiency Ra90 LED Chip on Board.
Energy efficiency classE
Nominal power14W
Nominal flux1851lm
Colour rendering index90
Rf91
Rg100
CCT nominal3500K
Lifetime (L80/B10)>50000h tq +25°C
Illuminotechnical characteristics
The internal optical system is composed of 2 metallised polycarbonate reflectors coupled to two high reflectance anodised aluminium reflectors and holographic filters. Louver screen in silk-screen printed extra-clear glass. ADJUSTABLE version - that allows to change from one beam to the other in a uniform way by adjusting the 2 optical systems.
OpticFLOOR WASHER
Optical efficiencyDEEP - 34%
WIDE - 23%
WIDE - 23%
Fixture fluxDEEP - 635lm
WIDE - 416lm
WIDE - 416lm
Luminous efficacyDEEP - 41lm/W
WIDE - 27lm/W
WIDE - 27lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
The light frame is made of die-cast anodised and powder-coated aluminium. External frame made of die-cast anodised and powder-coated aluminium.
Colour and finishFerrite
Weight2.35Kg
VersionADJUSTABLE
Degree of protectionIP66
Mechanical ResistanceIK10
Electrical characteristics
Complete with electronic ON-OFF power supply. Pre-cabled with a 1m H07RN-F (2x1,5mm²) cable. Luminaire compliant with EN 60598-2-22 for power supply from a centralised emergency system CPSS (Central Power Supply System), not incorporated in the luminaire - high risk areas excluded. The default power and flux are 100% in AC and 100% in DC.
Fixture Power16W
Power supply220-240Vac 50/60Hz
Insulation ClassCLASS 2
Type of driver / ControlON-OFF
Driver includedYES
Class FYES
SAFE FLICKERPstLM=<1 and SVM=<0.4 (IEC TR 61547-1 and IEC TR 63158), to ensure a more comfortable and safe light
Ambient temperature-25°C / +35°C
Installation
To be completed with a special nylon outer casing fitted for parallel connection.
Notes
Designed in collaboration with Gensler. Uses the "Waterblock Smart" technical solution that involves resin coating the connection cables, limiting the risk of humidity reaching the driver or the fixture. It is possible to subject the product to Cataphoresis treatment on request. 110-277Vac version available on request.
Warranty
5 years.
Warning
Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.
Related codes
1 / 2
| Code |
|---|
| 1E3219 |
Nylon outer casing fitted for parallel connection with feed through-wiring.
AxBxH=207x207x114.5mm.
For flush or overlay installation.
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| 1E3440 |  |
Plate accessory for wall mounted installation.
Powder coated anodised aluminium.
AxBxH=201x201x107mm.
1 / 2
| Code | Colour | H mm | Kg | ||
|---|---|---|---|---|---|
| 1E3437 | | 400 | 3.5 | ||
| 1E3438 | | 800 | 5.8 | ||
| 1E3439 | | 1000 | 7 |
Powder coated anodised aluminium bollard.
1 / 2
| Code |
|---|
| 1E3450 |
Fixing rods for installation in concrete.
AISI 316 stainless steel.
H=147mm.
0.36Kg.
For Zedge Pro Bollard installation with pole 1E3437, 1E3438, 1E3439.
For Zedge Pro Bollard installation with pole 1E3437, 1E3438, 1E3439.
Accessories
| Code |
|---|
| 1E2769 |
Linear connection box IP66/IP68.
5 poles max. wire section 1.5mm².
Cable diameter range from 7 to 12mm.
| Code |
|---|
| 1E2494 |
Multiple connection box IP68.
1 IN - 3 OUT 4 poles max. wire section 2.5mm².
Cable diameter range from 6 to 12mm.
| Code |
|---|
| 1E3305 |
Tightening wrench for the connector kit.
1 / 2
| Code |
|---|
| A013B |
Surge protector compatible with CLASS II lighting fixtures and electronic drivers.
Operating voltage 220-240Vac.
SPD type 2+3.
Max surge protection 10kV.
CLASS II
IP67
Downloads