Bollards
Zedge Bollard
Code
1E389890
Light colour
3500K
90
90
Light distribution
Floor Washer
Output
3.9W
186lm
186lm
Power supply
Control
Control
24Vdc
Colour
1 / 3
Technical Data
Concept
Asymmetric emission LED bollard.
Source
Ra90 LED board.
Energy efficiency classD
Nominal power3,9W
Nominal flux570lm
Colour rendering index90
Rf83.6
Rg96.5
CCT nominal3500K
Lifetime (L80/B10)100000h tq +25°C
Lifetime (L90/B10)59000h tq +25°C
Illuminotechnical characteristics
A high reflectance anodised aluminium reflector. Floor Washer HO version: polycarbonate clear screen.
OpticFloor Washer
Optical efficiency32.66%
Fixture flux186lm
Luminous efficacy48lm/W
Photobiological safetyCompliant with RG1 low risk group
BUG rating in compliance with IES TM 15 07B=0 U=1 G=0
Mechanical characteristics
Powder coated anodised aluminium bollard.
Colour and finishFerrite
DimensionsAxBxH 64x64x400mm
Weight0.8Kg
VersionFloor Washer HO
Degree of protectionIP66
Mechanical ResistanceIK10
Electrical characteristics
24V version to be powered with an electronic 230V/24Vdc transformer available as an accessory and dimmable with the special accessory kit. Casambi control system available using a dedicated accessory (only with DALI dimmer). 24V version: pre-cabled with a 1m H07RN-F (2x1.5mm²) cable.
Fixture Power3.9W
Power supply24Vdc
Insulation ClassCLASS 3
Driver includedNO
Ambient temperature-25°C / +35°C
Installation
To be completed with a stainless steel anchoring system, available for the double version with a plate for installation with dowels or with fixing rods for installation in concrete.
Notes
Uses the "Waterblock Smart" technical solution that involves resin coating the connection cables, limiting the risk of humidity reaching the driver or the fixture. It is possible to subject the product to Cataphoresis treatment on request. 110-277Vac version available on request.
Commissioning of the control system via free APP; the intervention of a specialist technician can be quoted on request.
Warranty
5 years.
Warning
Luminaire designed for disposal/recycling at end-of-life.
Replaceable (LED only) light source by a professional.
Related codes
1 / 2
| Code | |||||
|---|---|---|---|---|---|
| 1E3740 |
AISI 316 stainless steel plate with fixing rods for installation in concrete.
1 / 2
| Code | |||||
|---|---|---|---|---|---|
| 1E3741 |
AISI 316 stainless steel plate for surface installation.
Can be used with 1E3450 fixing rods.
1 / 2
| Code | |||||
|---|---|---|---|---|---|
| 1E3450 |
Fixing rods for installation in concrete.
AISI 316 stainless steel.
H=147mm.
0.36Kg.
For Zedge Bollard installation with plate 1E3741.
For Zedge Bollard installation with plate 1E3741.
| Code | IP | Output voltage | Power supply | Power | LxHxP |
|---|---|---|---|---|---|
| 1E4359 | IP67 | 24Vdc | 220-240Vac | 14,4W | 79x25x38mm |
| 1T3586 | IP67 | 24Vdc | 220-240Vac | 75W | 140x32x63mm |
| 1T3587 | IP67 | 24Vdc | 220-240Vac | 100W | 230x87x43mm |
| 1T3588 | IP67 | 24Vdc | 220-240Vac | 200W | 238x42x67mm |
Electronic ON-OFF power supply.
1 / 2
| Code | IP | Output voltage | Power supply | Power | LxHxP |
|---|---|---|---|---|---|
| 1E4397EL | IP68 | 24Vdc | 220-240Vac | 17W | 122x26x54mm |
Electronic ON-OFF power supply.
Accessories
1 / 2
| Code | |||||
|---|---|---|---|---|---|
| 1E2769 |
Linear connection box IP66/IP68.
5 poles max. wire section 1.5mm².
Cable diameter range from 7 to 12mm.
| Code | |||||
|---|---|---|---|---|---|
| 1E2494 |
Multiple connection box IP68.
1 IN - 3 OUT 4 poles max. wire section 2.5mm².
Cable diameter range from 6 to 12mm.
| Code | |||||
|---|---|---|---|---|---|
| 1E2493 |
Linear connection box IP68.
4 poles max. wire section 2.5mm².
Cable diameter range from 7 to 12mm.
| Code | |||||
|---|---|---|---|---|---|
| 1E3305 |
Tightening wrench for the connector kit.
| Code | |||||
|---|---|---|---|---|---|
| 1T6581 |
Dimmer for 12-24Vdc constant voltage LED driver.
1-10V/DALI control input.
IP20
1 / 2
| Code | |||||
|---|---|---|---|---|---|
| 1E3048 |
IP67 wireless control unit with DALI interface.
It generates a local DALI2 bus, enhabling a direct connection to a DALI interface LED driver.
The module can only be used in a closed system and cannot be connected to an existing DALI network.
The module is wireless controlled using a Casambi app for smartphones and tablets using Bluetooth 5.0 technology.
The devices automatically create an adaptive, robust, and reliable wireless mesh network, allowing for the easy and efficient management of a high number of fixtures.
The control unit is preset to the DALI 1CH profile, maning the device can control a single DALI driver with broadcast commands.
In addition to the DALI broadcast, other operating modes are available, such as:
- Button (normally open)
- Control unit 0/1-10V
- Control unit DALI Tunable White DT8
- Presence sensor
1 / 2
| Code | |||||
|---|---|---|---|---|---|
| 1E4369 |
IP67 Extender for wireless control of LED driver with dimming DALI interface based on Casambi technology.
It has a DALI2 output with the capacity to control up to 40 lighting fixtures.
With the addition of a further external BUS DALI power supply it is possible to control up to 64 fixtures.
IP67 Extender is preset to the DALI broadcast profile, meaning all the luminaires connected to it are dimmable at the same level.
In addition to the DALI broadcast other operating modes are available, such as:
- EXTENDER DALI 8CH
- EXTENDER DALI Tunable White
- EXTENDER DALI 4CH
- EXTENDER DALI DT8 Tunable White
Downloads