ArrowIcon Overview
Bollards

Mrs Bo Bollard
Optic head

Code

1E4017EL

Light colour
4000K
80
Light distribution

Output
19.8W
978lm
Power supply Control
220-240Vac
ON-OFF
Colour
1.24
IP66
IK10
1 / 3
Prev
Next

Technical Data

Source
Chip on Board LED Ra80. Ra90 on request.
Energy efficiency classD
Nominal power17W
Nominal flux2774lm
Colour rendering index80
Rf82
Rg95
CCT nominal4000K
SDCM2
Lifetime (L80/B10)>50000h tq +25°C
Illuminotechnical characteristics
A high reflectance anodised aluminium printed reflector. Transparent polycarbonate screen placed horizontally to avoid upwards flow (0 candles above horizontal axis).
Emission360°
OpticREFLECTOR
Optical efficiency35%
Fixture flux978lm
Luminous efficacy49lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
Extruded aluminium body covered with cataphoresis protective treatment and coated with powder painting in Ferrite finish color. Anodized die-cast aluminium optical head.
Colour and finishFerrite
DimensionsØ 160mm
Weight1.24Kg
Degree of protectionIP66
Mechanical ResistanceIK10
Electrical characteristics
Integrated power supply as electronic ON-OFF version. Luminaire compliant with EN 60598-2-22 for power supply from a centralised emergency system CPSS (Central Power Supply System), not incorporated in the luminaire - high risk areas excluded. The default power and flux are 100% in AC and 100% in DC.
Fixture Power20W
Power supply220-240Vac 50/60Hz
Insulation ClassCLASS 2
Type of driver / ControlON-OFF
Driver includedYES
Class FYES
SAFE FLICKERPstLM=<1 and SVM=<0.4 (IEC TR 61547-1 and IEC TR 63158), to ensure a more comfortable and safe light
Ambient temperature-25°C / +35°C
Installation
"Bayonet" fixing system for the optical head. Available with three different height poles - 371, 771 and 971mm. To be completed with a stainless steel anchoring system, available in two versions with hidden plate or surface plate for installation with dowels. On both mounting options can be applied stainless steel rods for installation in concrete.
Notes
Uses the "Waterblock Plus" technical solution that involves resin coating the connection cables and completely resin coating the integrated driver limiting the risk of humidity reaching the fixture. Cataphoresis tratement for the optical head available on request. 110-277Vac version available on request.
Warranty
5 years.
Warning
Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.

Related codes
1 / 2
Prev
Next
CodeColourH mmKg
1E40303710.8
1E40317711.6
1E40329712
Extruded aluminium body covered with cataphoresis protective treatment and coated with powder painting.
1 / 2
Prev
Next
Code
1E4360
Hidden fixing plate. AISI 316 stainless steel compatible with dowels to be inserted into holes with 8mm diameter. 0.3Kg.
1 / 2
Prev
Next
Code
1E4034
Fixing rods for installation in concrete. AISI 316 stainless steel. H=144mm. 0.31Kg.

To install MRS BO BOLLARD with hidden fixing plate (1E4360).
1 / 2
Prev
Next
Code
1E4035
Fixing plate with flange. AISI 316 stainless steel compatible with dowels to be inserted into holes with 8.5mm diameter. 0.62Kg.
1 / 2
Prev
Next
Code
1E3450
Fixing rods for installation in concrete. AISI 316 stainless steel. H=147mm. 0.36Kg.

To install MRS BO BOLLARD with fixing plate with flange (1E4035).

Accessories

Code
1E2769
Linear connection box IP66/IP68. 5 poles max. wire section 1.5mm². Cable diameter range from 7 to 12mm.
Code
1E2494
Multiple connection box IP68. 1 IN - 3 OUT 4 poles max. wire section 2.5mm². Cable diameter range from 6 to 12mm.
Code
1E3305
Tightening wrench for the connector kit.
1 / 2
Prev
Next
Code
A013B
Surge protector compatible with CLASS II lighting fixtures and electronic drivers. Operating voltage 220-240Vac. SPD type 2+3. Max surge protection 10kV. CLASS II IP67

Downloads

Mrs Bo Bollard - Optic head

Do you think Mrs Bo could be useful for your project?


Contact us!