Wall mounted luminaires

Threesixty
Ø 384mm

Code

1T6089DA90

Light colour
4000K
90
Light distribution
Opal+Halo
Output
48.4W
2780lm
Power supply Control
220-240Vac
DALI
Colour
4.6
IP20
IP40
1 / 3
Prev
Next

Technical Data

Source
The LED Engine is made up of self-cooling circular boards. Tunable White version available on request.
Energy efficiency classE
Nominal power43W
Nominal flux4223lm
Colour rendering index90
Rf89.8
Rg98.7
CCT nominal4000K
Lifetime (L80/B10)>50000h tq +25°C
Illuminotechnical characteristics
OPAL Direct + HALO effect Version: High luminance transmission and light diffusion opaline polycarbonate lower diffusive screen. Small indirect light component for a backlit effect.
EmissionOPAL + HALO
Optical efficiency66%
Fixture flux2780lm
Luminous efficacy57lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
Calendered extruded aluminium body.
Colour and finishDeep black
DimensionsD=384mm
Weight4.6Kg
Degree of protectionIP20 for recessed part
Degree of protectionIP40 for exposed part
Electrical characteristics
Integrated DALI power supply. Emergency Pack available on request. Equipped with a rapid connector for mains connection. Luminaire compliant with EN 60598-2-22 for power supply from a centralised emergency system CPSS (Central Power Supply System), not incorporated in the luminaire - high risk areas excluded. The default power and flux are 100% in AC and 100% in DC.
Fixture Power48W
Power supply220-240Vac 50/60Hz
Insulation ClassCLASS 1
Type of driver / ControlDALI
Driver includedYES
Class FYES
SAFE FLICKERPstLM=<1 and SVM=<0.4 (IEC TR 61547-1 and IEC TR 63158), to ensure a more comfortable and safe light
Ambient temperature0°C / +25°C
Installation
Polycarbonate fixing system is pre-set for ceiling or wall mounted installations. Recessed installation is possible using a special accessory to be ordered separately.
Notes
Casambi control system available using a dedicated accessory. Check mounting instructions to verify the quantity of DALI drivers installed. 110-277Vac version available on request. Commissioning of the control system via free APP; the intervention of a specialist technician can be quoted on request.
Warranty
5 years.
Warning
Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.

Related codes

1 / 2
Prev
Next
CodeColourDimensions
ØxH mm
Cutout hole
1T6402460x165Ø450
Casing for semi or completely recessed installation. Load bearing outer casing measuring 384mm and 590mm. Powder coated, spun aluminium body. The outer casing attaches to the ceiling with pre-galvanised steel brackets. Halo Version.

Accessories

1 / 2
Prev
Next
Code
2T0131
IP20 Extender for wireless control of LED driver with dimming DALI (or 1-10V) interface based on Casambi technology. It has a DALI2 output with the capacity to control up to 40 lighting fixtures. With the addition of a further external BUS DALI power supply it is possible to control up to 64 fixtures. IP20 Extender is preset to the DALI broadcast profile, meaning all the luminaires connected to it are dimmable at the same level. In addition to the DALI broadcast other operating modes are available, such as:
  • EXTENDER DALI 8CH
  • EXTENDER DALI Tunable White
  • EXTENDER 0/1-10V
  • EXTENDER DALI 4CH
  • EXTENDER DALI DT8 Tunable White
If different from the preset mode, the desired operating profile must be set directly by the user before coupling the extender to the Casambi network. LxHxP=130x22x30mm.

Downloads

Threesixty Ø 384mm

Do you think Threesixty could be useful for your project?


Contact us!