Wall mounted luminaires
Threesixty
Ø 1150mm
Code
1T6256DA
Light colour
3000K
80
80
Light distribution
Opal
Output
273W
22217lm
22217lm
Power supply
Control
220-240Vac
DALI
DALI
Colour
1 / 3
Technical Data
Source
The LED Engine is made up of self-cooling circular boards. Tunable White version available on request.
Energy efficiency classD
Nominal power243W
Nominal flux36705lm
Colour rendering index80
Rf82.9
Rg97
CCT nominal3000K
SDCM3
Lifetime (L80/B10)>50000h tq +25°C
Illuminotechnical characteristics
OPAL Direct Version: High luminance transmission and light diffusion opaline polycarbonate lower diffusive screen.
EmissionDOWN OPAL
Optical efficiency61%
Fixture flux22217lm
Luminous efficacy81lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
Calendered extruded aluminium body.
Colour and finishDeep black
DimensionsD=1150mm
Weight23Kg
Degree of protectionIP20 for recessed part
Degree of protectionIP40 for exposed part
Electrical characteristics
Integrated DALI power supply. Emergency Pack available on request. Equipped with a rapid connector for mains connection.
Fixture Power273W
Power supply220-240Vac 50/60Hz
Insulation ClassCLASS 1
Type of driver / ControlDALI
Driver includedYES
Class FYES
Ambient temperature0°C / +25°C
Installation
Polycarbonate fixing system is pre-set for ceiling or wall mounted installations. Suspension and recessed installation is possible using a special accessory to be ordered separately.
Notes
Casambi control system available using a dedicated accessory. Check mounting instructions to verify the quantity of DALI drivers installed. 110-277Vac version available on request. Commissioning of the control system via free APP; the intervention of a specialist technician can be quoted on request.
Warranty
5 years.
Warning
Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.
Related codes
1 / 2
| Code | Colour | Dimensions ØxH mm | Cutout hole | ||
|---|---|---|---|---|---|
| 1T6301 |  | 1187x99 | Ø1175 |
Adjustable frame for semi or completely recessed installation.
Non load bearing frame compatible with all sizes.
Powder coated, extruded, calendered aluminium body.
The outer casing attaches to the ceiling with pre-galvanised steel brackets.
The fixture must then be fixed to the ceiling using a suspension cable with an ABS control system installed in the outer casing.
Minimum ceiling height 230mm.
| Code | Colour | L mm | |||
|---|---|---|---|---|---|
| 1T6282 |  | 2000 | |||
| 1T6285 | | 4000 |
Suspension kit composed of 3 steel cables with an ABS control system.
Suspension kit compatible with ceiling or wall installations, even inclined.
| Code | Colour | Driver | |||
|---|---|---|---|---|---|
| 1T6289DA | | DALI |
Accessory for suspension installation composed of a canopy and 3 or 5 poles complete with a 4000mm power cable.
Accessories
1 / 2
| Code |
|---|
| 2T0131 |
IP20 Extender for wireless control of LED driver with dimming DALI (or 1-10V) interface based on Casambi technology.
It has a DALI2 output with the capacity to control up to 40 lighting fixtures.
With the addition of a further external BUS DALI power supply it is possible to control up to 64 fixtures.
IP20 Extender is preset to the DALI broadcast profile, meaning all the luminaires connected to it are dimmable at the same level.
In addition to the DALI broadcast other operating modes are available, such as:
- EXTENDER DALI 8CH
- EXTENDER DALI Tunable White
- EXTENDER 0/1-10V
- EXTENDER DALI 4CH
- EXTENDER DALI DT8 Tunable White
Downloads