In-ground luminaires
Keplero 280 Wall Washer RGBW
Code
E013WWHRGWMXASS
Light colour
4000K
80
80
Light distribution
Wall Washer
Output
15W
357lm
357lm
Power supply
Control
120-277V
DMX RDM
DMX RDM
Colour
RGBW
RGB
WHITE
RED
GREEN
BLUE
1 / 8
Technical Data
Source
High efficiency RGBW LED Emitter.
Energy efficiency classG
Nominal power49W
Nominal fluxSee photometries
Colour rendering indexSee photometries
CCT nominalSee photometries
Illuminotechnical characteristics
A Wall Washer optical system composed of a PMMA lens, a highly reflective anodised aluminium reflector and a holographic filter.
OpticWALL WASHER
Beam anglesWW
Optical efficiency100%
Fixture fluxRGBW - 1091lm
RGB - 949lm
WHITE - 357lm
RED - 359lm
GREEN - 593lm
BLUE - 113lm
RGB - 949lm
WHITE - 357lm
RED - 359lm
GREEN - 593lm
BLUE - 113lm
Luminous efficacyRGBW - 19lm/W
RGB - 16lm/W
WHITE - 24lm/W
RED - 18lm/W
GREEN - 21lm/W
BLUE - 6lm/W
RGB - 16lm/W
WHITE - 24lm/W
RED - 18lm/W
GREEN - 21lm/W
BLUE - 6lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
Die-cast aluminium body with 3 layers of protection: anodised, cataphoresis and black paint. Brushed stainless steel (AISI 316) ultra flat decorative ring with bevelled edge (natural finish). Version with anti-slip protective glass for public pedestrian areas. Anti theft stainless steel A4 Torx screws.
Colour and finishBrushed stainless steel
Weight5.7Kg
VersionANTI-SLIP GLASS
Degree of protectionIP66,IP67
Mechanical ResistanceIK10
Electrical characteristics
Integrated electronic power supply. Controlled using DMX-RDM protocols that make it possible to programme the fixture remotely (no dip-switch) using the DMX data line. Programming the fixtures is done using the USB-RDM programmer that is available as an accessory.
Fixture PowerSee photometries
Power supply120-277V 50/60Hz
Insulation ClassCLASS 1
Type of driver / ControlDMX RDM
Driver includedYES
Class FYES
Ambient temperature-25°C / +35°C
Installation
Nylon installation sleeve to be ordered separately as an accessory. The sleeve is pre-set for both flush or straight edge installation. 20kN resistance to static load.
Notes
All light fixtures must be completed with an installation sleeve. All versions of the KEPLERO family meet all the requirements of EN 60598-2-13 standard regarding drive-over and walk-over performances. Low temperatures on the glass make them suitable even for installation in "special areas", such as spaces for children. Photometrics show the maximum emission values of fixtures. Uses the "Waterblock Plus" technical solution that involves resin coating the connection cables and completely resin coating the integrated driver limiting the risk of humidity reaching the fixture. 110-277Vac version available on request.
Warning
Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.
Related codes
| Code |
|---|
| 1E2394 |
Grey nylon installation sleeve.
The sleeve is pre-set for both flush or straight edge installation.
Complete with dedicated cover cap for installations in concrete.
Flush ring Ø 286 H.225.
Straight edge ring Ø 271 H. 223.
Accessories
| Code |
|---|
| 1E2496 |
Metal handle for fixture removal
| Code |
|---|
| 1E2495 |
Features TORX HEAD, TX 30.
| Code |
|---|
| 1E0388 |
Sucker tool to raise the glass.
| Code |
|---|
| 1E3184 |
IP68 4-way cable connector (5 pole).
| Code |
|---|
| 1E2767 |
USB-RDM Programmer code.
DMX-RDM (Remote Device Management) address planner.
Used with the "RDM Targetti" software that can be downloaded for free from the Targetti website download section.
To be used with all RGBW products.
The USB-RDM programmer manages to direct DMX-RDM fixtures if there are no BUFFER or Splitter DMXs on the section.
Please refer to the instructions for more details.
| Code |
|---|
| A077 |
my-SCENARIO Show Store.
Programmable DMX interface that integrates the latest innovations in lighting control in architectural and entertainment applications.
It features USB Type-C and Ethernet ports for programming and remote control.
The unit can be fully programmed with ESA Pro 2 software (available for Windows and Mac users) or via mobile applications such as Arcolis (available for iOS or Android devices).
It can be fully customised: pixel mapping, triggering management, patch configuration and much more.
The system offers great possibilities for the control of your lighting installation: multi zone control (allowing the management of up to 5 indipendent zones), extended triggers (time/date, Sunrise/Sunset, input ports, TCP/UDP commands), 16-bit channels management, full recovery after power loss, up to 99 total scenes, and 1024+ DMX channels.
The intuitive backlit keyboard comes with 10 preset buttons for a user friendly experience.
| Code |
|---|
| 1T6499 |
myScenario Wall.
DMX controller with a glass touch sensitive screen for architectural applications.
It can control two different DMX universes (2x 512 channels).
Stand alone function or connected to a computer using a USB port.
Software for creating scenarios (that can be downloaded from the Targetti website) included.
It can manage 10 different lighting zones and 50 scenarios per zone.
The touch keys on the front make it possible to modify and recall programmed scenarios.
USB cable included.
To be used with all RGBW products.
1 / 2
| Code |
|---|
| A013A |
Surge protector compatible with CLASS I lighting fixtures.
Operating voltage 230-277Vac.
SPD type 2+3.
Max surge protection 10kV.
CLASS I
IP67
Downloads