In-ground luminaires

Keplero 50
Honeycomb

Code

E020SPL82724CSS

Light colour
2700K
80
Light distribution
SP
17°
Output
2.7W
95lm
Power supply Control
24Vdc
Colour
0.24
IP66
IP67
IP68
IP69
IK08
0.3m
1 / 3
Prev
Next

Technical Data

Source
High efficiency Ra80 LED Emitter.
Energy efficiency classF
Nominal power2W
Nominal flux251lm
Colour rendering index80
Rf83.1
Rg98.2
CCT nominal2700K
Lifetime (L80/B10)>50000h tq +25°C
Illuminotechnical characteristics
Precision optic system with PMMA lenses. Light control system integrated into the front for symmetric (honeycomb) emission.
OpticLENS
Beam anglesSP
Optical efficiency38%
Fixture flux95lm
Luminous efficacy35lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
Anodised polished aluminium body. Polished stainless steel front ring. Bevelled extra-clear front glass. Passive cooling system.
Colour and finishBrushed stainless steel
Weight0.24Kg
VersionHONEYCOMB
Degree of protectionIP66,IP67,IP68,IP69
Mechanical ResistanceIK08
Electrical characteristics
Powered by a 230V/24Vdc electronic transformer to be ordered separately. Pre-wired with 300mm of wire. Dimmable with a special accessory kit.
Fixture Power3W
Power supply24Vdc
Insulation ClassCLASS 3
Driver includedNO
Class FYES
Ambient temperature-25°C / +35°C
Notes
Casambi control system available using a dedicated accessory (only with DALI dimmer). Uses the "Waterblock Smart" technical solution that involves resin coating the connection cables, limiting the risk of humidity reaching the driver or the fixture. 110-277Vac version available on request. Values related to the power consumption of the fixture do not take into account the consumption of the accessory driver, which depends on the choice of driver. IP68: the projector is not suitable for permanent underwater installation but can withstand temporary accidental immersion to a depth of 2 metres (max.24h). IP69: IEC/EN 60529 standard compliant. Commissioning of the control system via free APP; the intervention of a specialist technician can be quoted on request.
Warning
Luminaire designed for disposal/recycling at end-of-life. Replaceable (LED only) light source by a professional. Replaceable control gear by a professional.

Related codes

CodeIPOutput voltagePower supplyPowerDimensions
LxHxP mm
1E4359IP6724Vdc220-240Vac14,4W79x25x38
1T3726IP2024Vdc220-240Vac50W185x22x64
1T3586IP6724Vdc220-240Vac75W140x32x63
1T3587IP6724Vdc220-240Vac100W230x87x43
1T3588IP6724Vdc220-240Vac200W238x42x67
Electronic ON-OFF power supply.
1 / 2
Prev
Next
CodeIPOutput voltagePower supplyPowerDimensions
LxHxP mm
1E4397ELIP6824Vdc220-240Vac17W122x26x54
Electronic ON-OFF power supply.
CodeH mmØ mm
1E34706044
Installation sleeve.

Accessories

Code
1E2769
Linear connection box IP66/IP68. 5 poles max. wire section 1.5mm². Cable diameter range from 7 to 12mm.
Code
1E2494
Multiple connection box IP68. 1 IN - 3 OUT 4 poles max. wire section 2.5mm². Cable diameter range from 6 to 12mm.
Code
1T6581
Dimmer for 12-24Vdc constant voltage LED driver. 1-10V/DALI control input. IP20
1 / 2
Prev
Next
Code
1E3048
IP67 wireless control unit with DALI interface. It generates a local DALI2 bus, enhabling a direct connection to a DALI interface LED driver. The module can only be used in a closed system and cannot be connected to an existing DALI network. The module is wireless controlled using a Casambi app for smartphones and tablets using Bluetooth 5.0 technology. The devices automatically create an adaptive, robust, and reliable wireless mesh network, allowing for the easy and efficient management of a high number of fixtures. The control unit is preset to the DALI 1CH profile, maning the device can control a single DALI driver with broadcast commands. In addition to the DALI broadcast, other operating modes are available, such as:
  • Button (normally open)
  • Control unit 0/1-10V
  • Control unit DALI Tunable White DT8
  • Presence sensor
If different from the preset mode, the desired operating profile must be set directly by the user before coupling the control unit to the Casambi network. LxHxP=108x28x65mm.
1 / 2
Prev
Next
Code
1E4369
IP67 Extender for wireless control of LED driver with dimming DALI interface based on Casambi technology. It has a DALI2 output with the capacity to control up to 40 lighting fixtures. With the addition of a further external BUS DALI power supply it is possible to control up to 64 fixtures. IP67 Extender is preset to the DALI broadcast profile, meaning all the luminaires connected to it are dimmable at the same level. In addition to the DALI broadcast other operating modes are available, such as:
  • EXTENDER DALI 8CH
  • EXTENDER DALI Tunable White
  • EXTENDER DALI 4CH
  • EXTENDER DALI DT8 Tunable White
If different from the preset mode, the desired operating profile must be set directly by the user before coupling the extender to the Casambi network. LxHxP=148x40x150mm.

Downloads

Keplero 50 - Honeycomb

Do you think Keplero could be useful for your project?


Contact us!