Surface projectors
Coro 120
DBS
Code
T045DBS927DB
Light colour
2700K
90
90
Light distribution
Zoom DBS
18°-53°
18°-53°
Output
29.9W
1709-1837lm
1709-1837lm
Power supply
Control
110-240Vac
CASAMBI
CASAMBI
Colour
SP
WFL
1 / 4
Technical Data
Source
High efficiency Chip on Board LED Ra90.
Energy efficiency classE
Nominal power25W
Nominal flux2841lm
Colour rendering index90
Rf92
Rg99
CCT nominal2700K
Lifetime (L80/B10)>50000h tq +25°C
Illuminotechnical characteristics
DBS version: hybrid optical system composed of a specular anodised aluminium reflector, optical glass lens, lens holder in black PPS, Lens Vector lens (liquid crystal glass lenses that are electronically controlled to regulate the light diffusion and the beam opening from SP to WFL).
OpticDBS
Beam anglesSP-WFL
Optical efficiencySP - 65%
WFL - 60%
WFL - 60%
Fixture fluxSP - 1837lm
WFL - 1709lm
WFL - 1709lm
Luminous efficacySP - 61lm/W
WFL - 57lm/W
WFL - 57lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
Die-cast aluminium housing. Powder coated aluminium front ring and joints. Passive heat sink cooling system. Optical unit adjustability: +/-165° on the horizontal plane and 180° on the vertical plane with the possibility of mechanical aiming locking through single knob for both aiming locks. Pre-set for additional accessories. Articulated arm adjustable of 180° on the vertical plane. Graduated references at the articulated joints.
Colour and finishDeep black
Weight2.25Kg
VersionLONG ARM
Degree of protectionIP20
Electrical characteristics
DBS version: complete with driver and Casambi control system (Casambi Ready).
Fixture Power30W
Power supply110-240Vac 50/60Hz
Insulation ClassCLASS 1
Type of driver / ControlCASAMBI
Driver includedYES
Class FYES
Ambient temperature0°C / +25°C
Installation
DBS version: complete with base for surface mounting.
Notes
Commissioning of the control system via free APP; the intervention of a specialist technician can be quoted on request.
Warranty
5 years.
Related codes
Accessories
| Code |
|---|
| A059 |
Emergency kit composed of an inverter a LIFePO4 battery and a LED Green indicator.
Allows permanent EP emergency use of the fixture it is connected to.
The 1h or 3h autonomy can be selected by configuring the fixture.
The batteries take 12h to completely recharge.
LED Green indicator wired to the inverter through single-core cables L= 800mm.
Emergency kit for fixtures that comply with EN 60598-2-22 standard, high risk areas excluded.
Battery size 160x54x30 mm.
Inverter size 165x40x25 mm.
Downloads