Surface projectors
Coro 120
Code
T045MWR930DB
Light colour
3000K
90
90
Light distribution
MWFL
45°
45°
Output
36.1-49.5W
4180-5320lm
4180-5320lm
Power supply
Control
1050/1400mA
Colour
1050mA
1400mA
1 / 4
Technical Data
Source
High efficiency Chip on Board LED Ra90.
Energy efficiency classE
Nominal power36/50W
Nominal fluxSee photometries
Colour rendering index90
Rf92
Rg101
CCT nominal3000K
Lifetime (L80/B10)>50000h tq +25°C
Illuminotechnical characteristics
MWFL version: reflector with ellipsoidal facets in reflective anodised aluminium. Complete with protective glass. Interchangeable reflectors available as accessories.
OpticREFLECTOR
Beam anglesMWFL
Optical efficiency87%
Fixture flux1050mA - 4180lm
1400mA - 5320lm
1400mA - 5320lm
Luminous efficacy1050mA - 116lm/W
1400mA - 107lm/W
1400mA - 107lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
Die-cast aluminium housing. Powder coated aluminium front ring and joints. Passive heat sink cooling system. Optical unit adjustability: +/-165° on the horizontal plane and 180° on the vertical plane with the possibility of mechanical aiming locking through single knob for both aiming locks. Pre-set for additional accessories. Articulated arm adjustable of 180° on the vertical plane. Graduated references at the articulated joints.
Colour and finishDeep black
Weight1.46Kg
VersionLONG ARM
Degree of protectionIP20
Electrical characteristics
To be completed with driver available in electronic ON-OFF,dimmable DALI and Casambi control system versions.
Fixture PowerSee photometries
Power supply1050/1400mA
Insulation ClassCLASS 3
Driver includedNO
Class FYES
Ambient temperature0°C / +25°C
Installation
To be completed with one of the dedicated installation systems: base for surface mounting, housing base with integrated driver, installation channel.
Notes
Values related to the power consumption of the fixture do not take into account the consumption of the accessory driver, which depends on the choice of driver. Commissioning of the control system via free APP; the intervention of a specialist technician can be quoted on request.
Warranty
5 years.
Related codes
| Code | Colour | Driver | Output current | Power supply | |
|---|---|---|---|---|---|
| A075ELDB |  | ON-OFF | 1050mA | 220-240Vac | |
| A075DADB | | DALI | 1050mA | 220-240Vac | |
| A075CADB | | CASAMBI | 1050mA | 220-240Vac | |
| A076ELDB | | ON-OFF | 1400mA | 220-240Vac | |
| A076DADB | | DALI | 1400mA | 220-240Vac | |
| A076CADB | | CASAMBI | 1400mA | 220-240Vac |
Surface mounting base with integrated driver.
| Code | IP | Output current | Power supply | Power | Dimensions LxHxP mm |
|---|---|---|---|---|---|
| 1T3781 | IP20 | 1050mA | 110-240Vac | max 42W | 160x35x83 |
| 1T9513EL | IP20 | 1400mA | 220-240Vac | 60W | 130x30x43 |
Electronic ON-OFF power supply.
| Code | IP | Output current | Power supply | Power | Dimensions LxHxP mm |
|---|---|---|---|---|---|
| 1T3783 | IP20 | 1050mA | 110-240Vac | max 42W | 160x35x83 |
| 1T9513DA | IP20 | 1400mA | 220-240Vac | 60W | 129x30x76 |
DALI power supply.
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| A071DB | |
Surface mounting base.
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| A072DB | |
Surface mounting channel 900mm.
The channel can be cut to length at intervals of 10cm.
With three mounting bases for Coro "80" and "120".
Accessories
1 / 2
| Code | Ø mm | ||||
|---|---|---|---|---|---|
| 1T3141 | 80 |
Flat glass, grooved refractive blade light filter.
This makes the beam take on an oval shape and when combined with spotlights, the light blade appears more prominent.
No for DBS version.
No for DBS version.
1 / 2
| Code | Ø mm | ||||
|---|---|---|---|---|---|
| 1T3140 | 80 |
Flat glass micro prismatic refractive diffusive filter.
This softens the luminous effect.
No for DBS version.
No for DBS version.
1 / 2
| Code | Ø mm | ||||
|---|---|---|---|---|---|
| 1T3423 | 80 |
Anti-glare louver.
Black painted metal honeycomb structure.
No for DBS version.
No for DBS version.
1 / 2
| Code | Ø mm | ||||
|---|---|---|---|---|---|
| 1T3432 | 80 |
Zoom.
Optical system consists of an optical glass flat convex lens, an anodized aluminium specular reflector and a diffusive holographic filter.
To be used after removing the existing optic.
It makes it possible to obtain a variable beam from 13° to 42°.
Cannot be used with DBS version and NSP optics.
Cannot be used with DBS version and NSP optics.
1 / 2
| Code | Ø mm | ||||
|---|---|---|---|---|---|
| 1T3142 | 80 |
Cut-off Tube.
Allows for the beam to be focused while removing the fall-off component.
No for DBS version.
No for DBS version.
1 / 2
| Code | Ø mm | ||||
|---|---|---|---|---|---|
| 1T3143 | 80 |
Black painted anodized diffusive aluminium asymmetric screen.
Complete with blade light filter.
Ideal for a Wall Washer effect.
To be combined with spot and flood optics.
No for DBS version.
No for DBS version.
| Code | Optic | Ø mm | |||
|---|---|---|---|---|---|
| A057SPR | SP 14° | 80 | |||
| A057MFR | FL 25° | 80 | |||
| A057MWR | MWFL 45° | 80 |
Interchangeable anodised reflective aluminium reflectors.
Available in Spot, Flood and Medium Wide Flood beams.
Not compatible with DBS version and NSP optics.
Not compatible with DBS version and NSP optics.
| Code |
|---|
| A059 |
Emergency kit composed of an inverter a LIFePO4 battery and a LED Green indicator.
Allows permanent EP emergency use of the fixture it is connected to.
The 1h or 3h autonomy can be selected by configuring the fixture.
The batteries take 12h to completely recharge.
LED Green indicator wired to the inverter through single-core cables L= 800mm.
Emergency kit for fixtures that comply with EN 60598-2-22 standard, high risk areas excluded.
Battery size 160x54x30 mm.
Inverter size 165x40x25 mm.
1 / 2
| Code |
|---|
| 1T5349 |
IP20 wireless control unit with DALI interface.
It generates a local DALI2 bus, enhabling a direct connection to a DALI interface LED driver.
The module can only be used in a closed system and cannot be connected to an existing DALI network.
The module is wireless controlled using a Casambi app for smartphones and tablets using Bluetooth 5.0 technology.
The devices automatically create an adaptive, robust, and reliable wireless mesh network, allowing for the easy and efficient management of a high number of fixtures.
The control unit is preset to the DALI 1CH profile, maning the device can control a single DALI driver with broadcast commands.
In addition to the DALI broadcast, other operating modes are available, such as:
- Button (normally open)
- Control unit 0/1-10V
- Control unit DALI Tunable White DT8
- Presence sensor
1 / 2
| Code |
|---|
| 2T0131 |
IP20 Extender for wireless control of LED driver with dimming DALI (or 1-10V) interface based on Casambi technology.
It has a DALI2 output with the capacity to control up to 40 lighting fixtures.
With the addition of a further external BUS DALI power supply it is possible to control up to 64 fixtures.
IP20 Extender is preset to the DALI broadcast profile, meaning all the luminaires connected to it are dimmable at the same level.
In addition to the DALI broadcast other operating modes are available, such as:
- EXTENDER DALI 8CH
- EXTENDER DALI Tunable White
- EXTENDER 0/1-10V
- EXTENDER DALI 4CH
- EXTENDER DALI DT8 Tunable White
Downloads