Bollards
Lucera Bollard RGBW
Code
E008SPRGWMXFE
Light colour
6500K
Light distribution
NSP
10°
10°
Output
3.4W
170lm
170lm
Power supply
Control
120-240Vac
DMX RDM
DMX RDM
Colour
RGBW
RGB
WHITE
RED
GREEN
BLUE
1 / 8
Technical Data
Concept
Bollard with professional adjustable RGBW LED projectors
Source
RGBW multichip LED source. Color temperature of the white source: 6500K.
Energy efficiency classF
Nominal power2x8,3W
Nominal fluxSee photometries
CCT nominalSee photometries
Lifetime (L80/B10)>50000h tq +25°C
Illuminotechnical characteristics
Optical system made of transparent PMMA lens and tempered extra clear front glass with black silk-screen printing. Beam angle: NSP.
OpticLENS
Beam anglesNSP
Optical efficiency100%
Fixture fluxRGBW - 2x311lm
RGB - 2x176lm
WHITE - 2x170lm
RED - 2x59lm
GREEN - 2x114lm
BLUE - 2x23lm
RGB - 2x176lm
WHITE - 2x170lm
RED - 2x59lm
GREEN - 2x114lm
BLUE - 2x23lm
Luminous efficacyRGBW - 24lm/W
RGB - 17lm/W
WHITE - 50lm/W
RED - 18lm/W
GREEN - 28lm/W
BLUE - 6lm/W
RGB - 17lm/W
WHITE - 50lm/W
RED - 18lm/W
GREEN - 28lm/W
BLUE - 6lm/W
Photobiological safetyCompliant with RG1 low risk group
Mechanical characteristics
Bollard in extruded aluminium and a double layer of Ferrite color finish. Die-cast aluminium lighting units. Adjustability of the optical units of 325° on the vertical plane with a +/-20° tilt on the horizontal plane. It is possible to slide the optical units inside the bollard from side to side on the horizontal axis. Locking system through Hex Key.
Colour and finishFerrite
DimensionsH=1010mm
Weight15.2Kg
Version2X
Degree of protectionIP66
Mechanical ResistanceIK09
Electrical characteristics
Integrated driver controlled by DMX-RDM protocols that make it possible to remotely programme the fixture (no dip-switch) using DMX data line. Programming the fixtures is done using the USB-RDM programmer that is available as an accessory.
Fixture PowerSee photometries
Power supply120-240Vac 50/60Hz
Insulation ClassCLASS 1
Type of driver / ControlDMX RDM
Driver includedYES
Class FYES
Ambient temperature-25°C / +35°C
Installation
Available in the 1 meter height version. To be completed with a stainless steel anchoring system, available in two versions with hidden plate or surface plate for installation with dowels. To both systems it is possible to apply stainless steel rods for installation in concrete.
Notes
Uses the "Waterblock Plus" technical solution that involves resin coating the connection cables and completely resin coating the integrated driver limiting the risk of humidity reaching the fixture. It is possible to subject the product to Cataphoresis treatment on request. 110-277Vac version available on request. The photometrics refer to individual projectors.
Warranty
5 years.
Related codes
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| A012AFE |  |
Hidden fixing plate.
Powder coated stainless steel.
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| A012CFE | |
Fixing plate with flange.
Powder coated stainless steel.
Accessories
| Code |
|---|
| A012B |
Fixing rods for stainless steel fixing plate.
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| A011AFE | |
Symmetric screen.
Powder coated stainless steel.
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| A011BFE | |
Anti-glare louver.
Powder coated stainless steel.
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| A011CFE | |
Asymmetric screen.
Powder coated stainless steel.
1 / 2
| Code | Colour | ||||
|---|---|---|---|---|---|
| A011DFE | |
Holder ring.
Powder coated aluminium.
| Code |
|---|
| A011E |
Blade of light filter.
To be completed with holder ring.
| Code |
|---|
| 1E2767 |
USB-RDM Programmer code.
DMX-RDM (Remote Device Management) address planner.
Used with the "RDM Targetti" software that can be downloaded for free from the Targetti website download section.
To be used with all RGBW products.
The USB-RDM programmer manages to direct DMX-RDM fixtures if there are no BUFFER or Splitter DMXs on the section.
Please refer to the instructions for more details.
| Code |
|---|
| A077 |
my-SCENARIO Show Store.
Programmable DMX interface that integrates the latest innovations in lighting control in architectural and entertainment applications.
It features USB Type-C and Ethernet ports for programming and remote control.
The unit can be fully programmed with ESA Pro 2 software (available for Windows and Mac users) or via mobile applications such as Arcolis (available for iOS or Android devices).
It can be fully customised: pixel mapping, triggering management, patch configuration and much more.
The system offers great possibilities for the control of your lighting installation: multi zone control (allowing the management of up to 5 indipendent zones), extended triggers (time/date, Sunrise/Sunset, input ports, TCP/UDP commands), 16-bit channels management, full recovery after power loss, up to 99 total scenes, and 1024+ DMX channels.
The intuitive backlit keyboard comes with 10 preset buttons for a user friendly experience.
| Code |
|---|
| 1T6499 |
myScenario Wall.
DMX controller with a glass touch sensitive screen for architectural applications.
It can control two different DMX universes (2x 512 channels).
Stand alone function or connected to a computer using a USB port.
Software for creating scenarios (that can be downloaded from the Targetti website) included.
It can manage 10 different lighting zones and 50 scenarios per zone.
The touch keys on the front make it possible to modify and recall programmed scenarios.
USB cable included.
To be used with all RGBW products.
Downloads