CATIRPEL
HOME>Products>Outdoor>24/48V Lighting Systems
Form
Follower
Form
Follower
"The Catirpel morphs into the form of a caterpillar in a tree, our fixtures weave into the surroundings, casting an enchanting spell of versatility.”
Hervé Descottes
L’Observatoire International
"The Catirpel morphs into the form of a caterpillar in a tree, our fixtures weave into the surroundings, casting an enchanting spell of versatility.”
Hervé Descottes
L’Observatoire International
Versatile and flexible. It wraps sinuously around every surface.
Versatile and flexible. It wraps sinuously around every surface.
It adapts naturally to curved surfaces.
It adapts naturally to curved surfaces.
Designed in collaboration with the lighting design firm L’Observatoire International, Catirpel is a modular projector system for outdoor lighting designed for all projects that require greater installation flexibility and accurate beam aim control.

Designed to adapt perfectly in environments where the support surface is curved, non-planar or uneven, it is the ideal solution to light architecture and landscapes.
Projector light modules
1x - 1 projector
3x - 3 projectors
5x - 5 projectors
Optics
Narrow Spot
Spot
Flood
Medium Wide Flood
Grazing
Colour temperature
2400K (NSP versions excluded)
2700K
3000K
4000K
Finishes
Available with black anodised or Ferrite finishes
Power Supply
24V remote driver
Design


The single module is a single projector combined with a spherical joint that allows for maximum installation freedom and movement.
Design
The single module is a single projector combined with a spherical joint that allows for maximum installation freedom and movement.
System modules

Catirpel is available in light modules with just one projector (1x) or multiple modules with three (3) or five (5x) projectors.
System modules

Catirpel is available in light modules with just one projector (1x) or multiple modules with three (3) or five (5x) projectors.
Adjustability

The spherical joint that connects the light units together makes it possible to curve multiple modules to obtain circular shapes to perfectly follow the features and peculiarities of the surface they are installed on such as trees, monuments, columns and architecture.
Adjustability

The spherical joint that connects the light units together makes it possible to curve multiple modules to obtain circular shapes to perfectly follow the features and peculiarities of the surface they are installed on such as trees, monuments, columns and architecture.

R 95mm

R 112.5mm
without accessory spacer


R 95mm
with accessory spacer

R 140mm
without accessory spacer


R 160mm
with accessory spacer
The spacer supplied as an accessory makes Catirpel even more flexible. Moving the light modules away from the installation surface makes it possible to increase the curvature of the modules and to aim each projector individually (+/-110°).
The spacer supplied as an accessory makes Catirpel even more flexible. Moving the light modules away from the installation surface makes it possible to increase the curvature of the modules and to aim each projector individually (+/-110°).
Lighting effects


It is possible to choose from four different beam openings from Narrow Spot (7°) to MWFL (48°) and a Grazing optic which is ideal to highlight details and materials with grazing lighting.
Scegli l'effetto Luminoso
NARROW SPOT
SPOT
19°
FLOOD
34°
MEDIUM WIDE FLOOD
48°
GRAZING
57/19°
Choose the lighting effect
Projection
Catirpel projectors can be installed on the ground using the practical earth spike to light hedges and trees from below
Downlighting
Tree branches become mounting supports to anchor lighting modules to using special belt straps to direct the light beam exactly where it is needed
Uplighting
With Catirpel it is also possible to light the upper part of the highest foliage easily reaching areas that are impossible to reach with classic lighting from below.
Grazing
Catirpel projectors with Grazing optics illuminate the entire length of tree trunks by highlighting the texture for a scenographic effect.
Moonlighting
Installed on the highest branches pointing downwards the grazing versions create light and shade effects on the leaves and branches.
Catirpel embraces architecture following every type of surface with extreme flexibility. The Grazing optic allows for uniform grazing lighting, ideal for highlighting texture and materials on facades, porticos, vaulted rooves and all vertical surfaces.
Catirpel provides the possibility to install projectors on all surfaces and to direct beams exactly where the project requires them for soft and diffused lighting, to highlight architectural details, indicate pedestrian paths or to create accents of light.
Projection
Catirpel projectors can be installed on the ground using the practical earth spike to light hedges and trees from below
Downlighting
Tree branches become mounting supports to anchor lighting modules to using special belt straps to direct the light beam exactly where it is needed
Uplighting
With Catirpel it is also possible to light the upper part of the highest foliage easily reaching areas that are impossible to reach with classic lighting from below.
Grazing
Catirpel projectors with Grazing optics illuminate the entire length of tree trunks by highlighting the texture for a scenographic effect.
Moonlighting
Installed on the highest branches pointing downwards the grazing versions create light and shade effects on the leaves and branches.
Catirpel embraces architecture following every type of surface with extreme flexibility. The Grazing optic allows for uniform grazing lighting, ideal for highlighting texture and materials on facades, porticos, vaulted rooves and all vertical surfaces.
Catirpel provides the possibility to install projectors on all surfaces and to direct beams exactly where the project requires them for soft and diffused lighting, to highlight architectural details, indicate pedestrian paths or to create accents of light.
Products
Market
Language
International
USA
International / en
Company.
Targetti Sankey S.r.l.
Single-member private limited liability company subject to management and control of 3F Filippi S.p.A.
Via Pratese, 164
50145 Firenze - Italy
Tel: +39 055 37911
Fax: +39 055 3791266
Email: targetti@targetti.com
CCIAA Firenze
Share Capital: € 500.000,00
VAT N. (IT): 01537660480
R.E.A: FI-275656
Group.
Social.
SHARE
QUICK CONTACT
LOGOUT
Cookie information
This website makes use of technical cookies, including third-party cookies, to improve your browsing experience.
For information about how they work, to disable them from your browser or to refuse consent to certain cookies, read the privacy policy.
By closing this banner, scrolling down this page or clicking on any of its elements, you consent to the use of cookies in compliance with Articles 122 (paragraph 1) and 154 (paragraph 1), letter h, of the Privacy Code.